DREMEL CUTTING WHEEL 426 – 32MM

Reinforced for durability, make cuts in e.g. hardened steel

SKU 2615042632 Category Tags ,

Description

What can you do with it?
Good for slicing, making straight cuts and slots in all kinds of metal, like
  • hardened steel
  • sheets metal
  • aluminum

Easily cut bolts, or make slots in rusted and/or stripped bolts / screws for removal with a screwdriver

How to use?
  • Use with 402 Mandrel: unscrew the top screw on the mandrel using the wrench, put the screw through the middle hole of the disk and screw it back on the mandrel
  • If using the metal cutting wheels, cut on high speed – use light pressure
  • The wheels will last longer and cut faster if light pressure is used rather than heavy pressure and there is less risk of breaking it
  • Since these disks are abrasive, the diameter of the wheel is going to wear away
  • If the wheel becomes too small to execute the cut, stop the cut and replace the wheel
  • When using a cut-off wheel, we recommend using a two handed golf like grip to hold and guide the tool and go for a right angle
  • If you angle the wheel in the cut, the wheel will probably break
Materials to use on
This cut-off disk can be used on different metal types, like
  • aluminum
  • copper
  • cast iron
  • But also for short cuts in plastic or brick.

On materials like a galvanized metal (Ductwork) or hardened steel, it’s best to use reinforced cut-off wheel (426)

Recommended speed
  • Aluminium 35000
  • Brass 35000
  • Copper 35000
  • Plastic 10-15000
  • Steel 35000
Specifications
  • Shank diameter:3,2 mm
  • Working diameter:32,0 mm
  • Max working depth:14,0 mm
  • Usage:Fiberglass reinforced cut-off wheel.
  • Width:32,0 mm
  • Maximum RPM:35.000 1/min
  • Length:32,0 mm
  • Height:1,0 mm
  • Package Contents:5 pieces
× WhatsApp Us