DREMEL CHAINSAW SHARPENING GRINDING STONE 453 – 4MM
Smallest chainsaw sharpening bit. Does not require spacers
Description
What can you do with it?
Sharpen the tooth of the chain.
How to use?
When sharpening a chain saw, sharpen all of the teeth going in one direction, then with the saw in the same position, line the tool up with the second 30° mark and sharpen the teeth that run in the opposing direction. Always try to do the same tooth two or three passes across each tooth. Use the spacers for the best result. They are used to move the pink or orange stones away from the attachment – so they don’t contact the attachment during operation. The pink stone (the largest) requires both spacers. The orange stone (the middle size) requires one spacer. The blue/grey stone does not require any spacers.
Materials to use on:
Chains of chainsaw
Recommended speeds:
Chainsaw Blade 30000
Specifications
- Shank diameter:3,2 mm
- Working diameter:4,0 mm
- Accessory length:45,0 mm
- Width:4,0 mm
- Length:4,0 mm
- Height:39,0 mm
- Maximum RPM:30.000 1/min
- Package Contents:3 pieces
