DREMEL SANDING DISC 180 GRIT 411
For (smooth) flat and edge sanding of soft materials such as wood or rust removal
Description
What can you do with it?
Common uses for the Dremel sanding disc include smoothing and shaping wood or removing paint. is great for (smooth) flat and edge sanding of soft materials such as wood and fiberglass Dremel sanding discs have a finer grit than Dremel sanding bands. Also used for rust removal
The lower the grit, the more material removal.
The SC411 (grit: 60) and SC413 (grit: 240) are from the Dremel Exclusive EZ Speedclic family. This makes accessory changes easy as PULL – TWIST – RELEASE.
The lower the grit, the more material removal.
The SC411 (grit: 60) and SC413 (grit: 240) are from the Dremel Exclusive EZ Speedclic family. This makes accessory changes easy as PULL – TWIST – RELEASE.
How to use?
- These discs are best used with the Dremel tool facing towards the work piece, and are flexible to accommodate for any curves on the project
- We recommend using mainly the center of the disc for maximum results
- Sanding discs will wear out and are replaceable by removing the mandrel
Materials to use on
These disks can be used to sand / smooth softer materials like
- hardwood
- softwood
- plastic
- fiberglass
- aluminum
- steel
Recommended speed
- Hardwood 10-35000
- Softwood 10-35000
- Aluminium 35000
- Brass 35000
- Copper 25-35000
- Plastic 10-20000
Specifications
- Shank diameter:3,2 mm
- Working diameter:19,0 mm
- Grit:180
- Maximum RPM:20.000 1/min
- Package Contents:36 pieces
